Anticorrosive steel pipe is how to do anti-corrosion?

Many people doubt the corrosion resistance of 3pe elbow anticorrosive steel pipe and 2pe elbow anticorrosive steel pipe. As long as you understand the manufacturing technology of 3pe elbow anticorrosive steel pipe and 2pe elbow anticorrosive steel pipe, you will understand that 3pe elbow anticorrosive steel pipe and 2pe elbow anticorrosive steel pipe have the same corrosion resistance as ordinary anticorrosive steel pipe. The 3pe elbow anti-corrosion steel pipe looks messy because the anti-corrosion of both ends on specific equipment. And the equipment is unable to meet the construction of the elbow. Generally speaking, only straight pipes are required to end construction on the equipment. About 3PE or 2PE anti-corrosion of elbow pipe, the general solution is as follows:

Once the first straight pipe for anti-corrosion, and then use a bending machine to the end of the anti-corrosion straight pipe bending into an elbow. This method is said to be feasible, but due to the messy construction technology and the difficulty of the technology, this method is rarely used.

Later, heat shrinkable tape was used for anti-corrosion, replacing the original anti-corrosion technology.

Now use polyethylene adhesive tape or polypropylene reinforced fiber anti-corrosion tape for anti-corrosion, instead of the original anti-corrosion technology.

When replacing one anticorrosion technology with another, please pay attention to the request of the party A or the designer for the new anticorrosion technology. However, in terms of anti-corrosion effect, no matter what kind of anti-corrosion technology is selected, it only needs to be used reasonably to meet the anti-corrosion plea of the product.

Although the technology of 3PE or 2PE bent pipe anti-corrosion steel pipe is messy, we will certainly not be careless and will still make it carefully. Please be sure to use our products.